Features
-
Coincident rotation center.
-
Patented Inline actuators provide ease of access.
-
Patent pending All - Flexure Drive™ system affords superior resolution for far less cost.
-
Small footprint allows multiple unit workstations.
-
Onboard controller for actuators avoids high cost of separate motion controllers.
-
Damped exterior shell design provides superior vibration and touch insensitivity.
-
Lightweight aluminum construction allows system to be moved easily by other motion equipment.
-
High mechanical stiffness affords rugged and stable base system.
-
Dual flexure Yaw and Pitch stages provide extreme resolution without arc error.
-
Can be added to the I3000 XYZ stage to provide a 6-axis system
Overview
Precision Angular Alignment
If you want the most extreme resolution in 3-axis rotational system for positioning that is rugged and repeatable, easy to use, with superior resolution - the Luminos RYP3000 is the most advanced 3-axis manual positioning / alignment system on the market. This 3-axis Roll Yaw Pitch positioner is flexure based with no frictional bearings. Each axis provides a total travel of 3 degrees. The patented Ratio Drive™ allows an incredible by hand resolution of 0.2 arc second Roll and 0.4 arc second Yaw and Pitch resolution without touch sensitivity. The coincident rotation point is projected one inch in front of the unit and 12.7 mm (0.5") above for unobstructed access.
Specifications
N/A
±1.5 degrees
±1.5 degrees
±1.5 degrees
±1.5 degrees
±1.5 degrees
±1.5 degrees
0.1 arc sec
10 arc sec
0.2 arc sec
30 arc sec
0.2 arc sec
30 arc sec
0.1 arc sec
120,944
0.2 arc sec
0.2 arc sec
60,472
60,472
±1.5 degrees
±1.5 degrees
Single
Rotational
Max 35µm
Dual
Rotational
Dual
Rotational
None
None
270 kN/m
120 kN/m
measured at the rotation center
60 kN/m
80 Nm/rad
120 Nm/rad
measured at the rotation center
150 Nm/rad
2.2 lbs (1 kg)
10 lbs (4.5 kg)
Stage must be protected from shock loading during transport and usage
Aluminum
6061 & 7075 - T6 anodized
600g
Approximate
4.50" x 1.75" x 2.70"
LxWxH excluding micrometers
2.10"
Base to top of mounting plate
0.26" diameter holes
1.00" x 4.00" centers (compatible with1.00" grid optical tables, units mount on 2" intervals with 0.25" allowance for routing of cables, etc.
1/2"
1"
Above top of mounting plate
Out from end of mounting plate
Order
Positioning System Accessories
If you don't see the accessories you require, contact us regarding design of components for your application.